Motion CFT-003 Podręcznik Użytkownika Pobierz pdf (Strona 43)

Chapter 3 Using the System 37

Using Hibernate

Hibernation is a state in which the computer shuts down to save power but first saves

everything in memory on the hard disk. When you restart the computer, your desktop is

restored exactly as you left it. Use hibernation to save power when you will be away from

the tablet for an extended time.

You can put your tablet on Hibernate manually from the Start button, or you can set it up to

hibernate when you press the power switch.

To set up the power switch to put the computer on Hibernate

1. Open Motion Dashboard to the Power panel (page 20).

2. Select one or both of the following:

• For Power switch on battery, select Hibernate.

• For Power switch plugged in, select Hibernate.

3. To put the computer on Hibernate, press the power switch.

To resume your work, press the power switch again.

Using Wi-Fi (802.11a/g/n)

Use the information in this section to set up a Wi-Fi connection. Wireless access requires an

802.11a, 802.11b, or 802.11g access point. Internet access requires a working Internet

connection.

DANGER: FAA regulations require that you disable any wireless connection when traveling

by air. Failure to disable the wireless connection on the system while traveling by air can

cause communications problems with aircraft instruments.

Enabling or disabling Wi-Fi

Before you can establish a Wi-Fi connection, you must enable the Wi-Fi adapter. You can

enable the Wi-Fi adapter using Motion Dashboard.

Note: Wireless cards consume battery power. To reduce power consumption when running

on battery power and when Wi-Fi is not being used, disable Wi-Fi in the Motion Dashboard.

To enable or disable Wi-Fi

1. Open the Motion Dashboard to the Wireless panel (page 20).

2. Select or clear the Enable Internal 802.11 Wireless check box.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Brak uwag

Motion CFT-003 Podręcznik Użytkownika Strona 43